Digital display, high time accuracy. Heating tube and board is together, even heating, safe and durable. Bottom board adopted with high temperature resistant foaming silicone, can resist 400 degree without deform. Fine appearance, small size and exquisite, increase efficiency greatly.
This machine can print any color code, portrait photos, landscape patterns, etc. On printed T-shirts, pillows, mouse pads, puzzles, porcelain plates, metal plates, and is especially suitable for advertising, gifts, publicity activities, etc. But also As a personalized gift to relatives and friends, it combines artistic appreciation and practicality. Plug in the power supply by hand, start the power switch, and the power indicator light indicates.
Adjust the thermostat to the desired temperature, and when the temperature reaches a certain temperature, the indicator light on the upper part of the thermostat goes out and you can start working. Set the timer to the required time. Ing board, stack the heat transfer paper (please pay attention to the front and back of the heat transfer paper), and press the handle down firmly until the end. Lay the clothes flat on the lower iron.The whole machine must have suitable and reliable ground protection. Do not use more than 30KG to avoid deformation of the handle. When stacking heat transfer paper, please pay attention to the front and back of the heat transfer paper. If it is cold torn heat transfer paper, wait 5-10 seconds before tearing off the heat transfer paper. If it is hot-tear heat transfer paper, the heat transfer paper must be torn off immediately after the hot stamping is completed. Successful hot stamping requires the correct time, temperature and pressure to cooperate with each other. The thickness and material of the clothing and the type of heat transfer paper all affect the effect of hot stamping. All kinds of heat transfer paper need to be tested and confirmed before mass production. Pressure: If the pressure is not enough or too large, please loosen the pressure adjusting screw first, then turn the pressure adjusting nut to adjust the pressure, and tighten the locking pressure adjusting screw after adjustment. Temperature: When the device reaches the set temperature, the heating plate does not heat up, please check the thermostat wiring and confirm whether the thermocouple is damaged (the thermostat will reach 180°C in about 5 minutes when the temperature controller is 0°C). Time: When the set time is reached, there is no alarm (the buzzer does not sound) or the alarm is constant (the buzzer does not stop), please check whether the contact point of the micro switch in the tail box is at a proper distance, and if there is any guide, please adjust it appropriately position. 1 x Heat Press Machine. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses".
The seller is "2020augustshop" and is located in this country: US. This item can be shipped to United States.