Clamshell Heat Press Machine Transfer Sublimation 15x15inch for Cloth T-Shirt US

  

Machine can heat transfer/ sublimation colorful pictures and words onto textiles made of. Cotton, flax, chemical fiber, nylon, etc. Machine can also conduct some heat-treatments such as hair-planting print. Conglutination of clothes with their lining under lower temperature and lower pressure such as the conglutination of kid?

S clothes, caps and shoes. Keep out of the reach of children.

Do not use for food processing or any other unintended use. Do not immerse the heat press in water or other liquid to prevent the risk of electricity shock. After finishing your work, please turn the machine off and pull off the plug. Pull out the plug to disconnect from output instead of pull the power cord. Do not allow power cord to touch hot surfaces, cool the machine before package or storage.

Do not operate heat press with a damaged cord or when the equipment has been broken. To reduce the risk of electric shock, do not disassemble or attempt to repair the heat press. Take it to a qualified service person for examination and repair. Incorrect assembly or repair could increase the risk of fire, electric shock, or injury to persons when the machine turns on for use.

220V before using this machine. Touch the heat plate when the machine is on or when its temperature is still high after turning it off. Burns may occur when touching hot metal parts.

To reduce the possibility of fire or circuit burnt for the circuit overload, do not operate other high power equipment on the same circuit. Shows the temperature and time. Allowing you to have f. Ull digital control over those two parameters. Electronically and a special alarm light notifies when the process is complete. The working surface is covered by. Easy to clean and more d. Adjuster: You can adjust the pressure to fit your heat. Heat-resistant silica-gel sponge is placed on the. Can endure maximum temperature of 400 degrees without any distortion.

This sponge makes printing on. Special or irregular textiles or clothes. Heating pipeline is connected with heating plate, so the working surface can be heated. N Sublimation Paper, Mirror Image. Nd Printing Side Matched Tight Without Margin.

Printing Side Upward For Better Printing. N The Board Before Printing. He Protective Film On The Board Before Printing.

He Protective Film Before Printing. Keep Temperature Sensitive Parts Away. N Light Color Transfer Paper, Mirror Image. Peel Off Base Paper Immediately After Printing.

Or Light Color Cotton T-Shirts. N Dark Color Transfer Paper. Peel Off Base Paper Before Printing, Tag. Nd Put Thermal Paper Above. Nd Peel Off Thermal Paper.

O Tagged on The Printing Side. He Sublimation Paper After Printed One Side, Thermal Paper Needed To Protect The Other Side During Printing.

Both Sides Printable, Printing Side. Before starting the intended operation, you can use the Pressure Knob to adjust the pressure between the heat plate and bottom board. Turning it clockwise will increase the pressure. Please pull the handle up and press it down to see whether the pressure is suitable. Connect the cord and power on.

2 Check the machine to ensure it is on a good condition: cord and line are not damaged or broken, the machine is put on a plain table or floor. 3 Press the power switch on, the panel is lighting up Do remember to pull the handle up so that heating plate goes up and opens the bottom board before plugging the machine to socket and turning the power switch on. Otherwise the buzz will ring. Setting the Time & Temperature.

Do remember to pull the handle. Up (so that heating plate goes up and opens the bottom board).

Ging the machine to socket. Turning the power switch on. To determine the suitable temperature and time according to the material.

S you intend to use. For two seconds to save the temperature setting. For two seconds to save the time setting.

After you save the target temperature and time, the LCD will show the working. Which is the current temperature of the heat plate.

The heat plate will take some time to warm up. Then the machine is ready to use.

On the sublimation paper or. Do not use the sublimation paper. Preparing the blank material e. Prepare the material you want to print the image on.

Place it on the silica-gel sponge. Cloth should lie on the board. Press the heat plate down to start heating.

THE TIMER WILL START WORKING AUTOMATICLY. Countdowns to zero and the buzzer rings, please.

Up to open the heating plate. And then take out the. And you will see the. Image is well pressed on the cloth. Be careful of the hot heating surface.

Please make sure the heating temperature and transfer time are correct. In order to extend the service life. Please turn the machine off for 15 minutes after using it continuously for 4 hours. The heat plate will take some time to warm up to reach the target temperature.

Warm-up time is about 10-20 minutes to reach 360. T set the temperature to more than 480?

Or it will shorten the service life of the machine. Trouble shooting for transfer print quality. Please Release the pressure knob, then use the handle to open it. Or start the machine, the heat will soon be ok to open the clamshell! He temperature is too low; o.

The pressure is not even; o. The time is too short. The time is too long which led to ink diffusion.

The pressure is too high; o. The temperature is too high. Part of design is indistinct. The heating is not even. Heat printing time is too long.

Depth of color is not the same. The coating is not even. Paper stick to the object.

The temperature is too high; or the coating of the object is not good. Pls check the temperature too high, voltage wrong, or enter the? Thank you for your reading!

When you read it here, we believe that you cherish our products. Please leave photo or video, it can help more friends. Need more machines, t-shirts, mugs, vinyl films? Just leave message and shout us. The item "Clamshell Heat Press Machine Transfer Sublimation 15x15inch for Cloth T-Shirt US" is in sale since Tuesday, July 30, 2019. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses". The seller is "colorsub" and is located in Walnut, California. This item can be shipped to United States.

• Brand: BetterSub
• Country/Region of Manufacture: United States
• Custom Bundle: Yes
• Features: Digital Display
• Material: Metal
• Model: XY-001
• MPN: Does Not Apply
• Press Size: 15 x 15 in
• Press Style: Clamshell
• Type: Sublimation Press
• Voltage: 110V