8 IN 1 15x12 Combo T-Shirt Mug Hat Heat Press Machine Transfer Sublimation DIY

  

This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 12" x 15" (38X30cm) heat platen with a full range of heating coils to allow for consistency throughout its surface.

The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 - 250ºC (about 430ºF). Large 12" x 15" transfer element - The 12" x 15" (38X30cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Digital LED controller - Preset the desired temperature and timer.

Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design - Allows the heating element to be moved safely aside and reduce the chances of accidental contact. Full-range pressure-adjustment knob - This allows the pressure to be adjusted according to the thickness of the material you are transferring to.

Teflon-coated platen press element - The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5 Long arm handle - Comfortable rubber grip for everyday use and long production runs.

Detachable lower platform - It is elevated with dual supports. Adjustable multi-spring balancer - Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board - Built-in structural support to maintain flatness. Warm up quickly and offer even heating.

Upgraded aluminium alloy cradle - Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. 6pcs Pressure Spring, Steady Heating and Pressure. Thickened Silicone Pad and Sponge Pad Ensure More Flat Pressing. Self Lock, No Need To Hold The Handle During The Press. Note: Remove The Protective Plastic Film on the Mug and Plate Press Before Using. Adjust the Height and Pressure of The Machine According To The Size of The Heat Press Product. Step2: Set Temp and Time. Set Heat Press Temperature and Time Depend on Your Material.

Step3: Place T-shirt and Design. When It Reaching Temp You Set, Place The Material on The Working Table and Close Handle. The Controller Will Sound When Reaching Time You Set, Release the Handle and Take Out the Material.

This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special tools. Press "SET", the upper display will showing "SP", and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press? (increase or decrease) to set the needed temperature. After setting well, please press "SET", the upper display will show "SK" to go on the next step for time setting. Press "SET" again, H1 LDE will showing "ST", then enter into the time setting.

(increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing). If the controller box showing nothing when power on, there are 2 solutions. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire.

Back cover of controller box, and examine the electricity box, to see if some thread fall off or not, if fall off, please match it. When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater. If the display is normal, then maybe is the second situation of "b", the thread wire were disconnect. If still showing 3 line, then is the first situation of "a", the socket wire were fall out or break.

Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it. Checking the wire of heating panel, the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay.

When power on, the controller box showing values but cannot heating up: the display showing the actual room's temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation "a", if cannot heat up, will be "b"situation. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above "a", if nothing showing, please following "b" to maintenance.

If no break, then replace the controller box. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly. The head machine's function is ok, but cannot count down, then please press the third button, this machine will count down.

If still cannot count down, please replace the controller box. Fahrenheit and Celsius scale are selectable. Allows pressure to be more evenly distributed across the entire platen when it is closed.

Built-in structural support to maintain flatness. Detached cradle for use of the mug elements. Size : 15.4"x17.1"x18.7. Model : 15x12 8in1 Heat Press Machine.

Dimension : 15 1/4"L x 15"W x 17H. Platen Press : 12" x 15"(38X30cm). Hat/Cap Press : 6"x 3"(curved).

Mug Press #1 : 2"-2.75" diameter (6OZ). Mug Press #2 : 3"-3.5" diameter (11OZ). Mug Press #3 : 12OZ latte mug (Cone). Mug Press #4 : 17OZ latte mug (Cone). Plate Press #1 : 5 max diameter.

Plate Press #2 : 6 max diameter. Temperature range : 0 - 480F (0 - 250C).

Adjustable height : 13 1/2" to 17". 1 x 15x12 T-shirt heat press machine. 2 x Free Teflon Sheet. Large 12" x 15" (38X30cm) transfer element. Digital LED temperature and time controller.

Full 360-degree rotation of swing-away design. 2 4/5 Long arm handle. Built-in fuse for safe using.

Adjustable feet for unevenly floor. Combo type, it could transfer images to T-shirt, mug, plate, cap and so on.

The changing among the spare parts is available when necessary. High precise automatic digital tempreture indicator. Heating coil and heating panel are integrated, safe and durable. Issues with certain thickness can also be transferred. Adopting advanced technology and good material for better effect.

Swing-away design and more even pressure guarantees your perfect printing. Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return.

Your product was damaged during transit. Please do not return or post items before obtaining instructions from us.

This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses".

The seller is "fansdealonline" and is located in this country: US. This item can be shipped to United States.

• Model: Heat Press Machine
• Wattage: 1250W
• Heap Platen: 15\
• Feature: Digital LCD timer and temperature control
• Timer control: 0 - 999 seconds
• Type: Clamshell Heat Press
• Press Style: Swing-arm
• Press Size: 12 x 15 in
• Voltage: 110 V
• Material: Metal
• Usage: Heat Transfer Printing
• Automation Type: Manual
• Features: Digital Display, Displays C or F, Interchangeable Platens
• Controller: Digital Time & Temperature on one control
• Printable Articles: Up to 10mm thickness
• Certification: CE
• Weight: 37 lbs
• Warranty: Lifetime
• Modified Item: No
• Platen Press: 15\
• Cord length: 4.5
• Adjustable height: 13 1/2\
• Mug Press #1: 2\
• Mug Press #2: 3\
• Mug Press #3: 12OZ latte mug (Cone)
• Mug Press #4: 17OZ latte mug (Cone)
• Plate Press #1: 5\
• Plate Press #2: 6\
• Allen Key: 1PC
• Socket Wrench: 1PC
• Teflon Sheet: 2PC
• T-Shirt: 1PC
• UPC: 0832419275232
• EAN: 0832419275232
• Brand: Carejoy